Spectra Logic 10000 User Manual download pdf (Page 89)

Chapter 6. Maintaining the Library

Packing the Library for Shipment

If you are shipping the library:

From One Location to Another Note the packing procedures outlined under Packaging,

below.

To Spectra Logic for Service First contact Spectra Logic Technical Support to obtain a

Return Materials Authorization (RMA) number and the correct shipping address (see

Chapter 8. Technical Support and Service). Then follow the instructions under

Packaging, below.

Caution: The library warranty is voided by shipping the library without

the proper original packaging (for full warranty details, see

Limited Warranty on page 106). The following steps describe

how to properly pack the library for shipment.

Packaging

To pack the library for shipping:

1. Unload all tapes from the library, including tapes in the tape drives as well as

any tapes in the carousel slots.

2. Power off the library.

3. Remove all attached power, SCSI, and serial connections, including SCSI

terminators or Fibre Channel connections.

4. Place the anti-static bag over the library.

5. Place the library on top of the bottom foam cushions in the box (see Figure 6-6

on page 90).

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 135 136

No comments

Spectra Logic 10000 User Manual Page 89